Step 1: Prepare your TV screen. Completely cover the area surrounding the screen with masking tape and paper. Make sure the masking does not touch the glass.
Step 2: Next, clean the screen with the Glare Buster anti glare glass cleaner. Buff dry using a clean cloth.
Step 3: Shake the Glare Buster can for 30 seconds—then test the spray action on paper.
Step 4: Hold the can 4 to 6 inches from the screen, and apply using an even spray pattern, like this one. Each pass across the screen should slightly overlap. Start and finish on paper surrounding the screen.
Step 5: Wait 2 minutes, then repeat step 4, placing a second coating on your TV screen.
Step 6: Wait 15 minutes, and then remove the masking tape and paper.
Cleaning:
Allow 14 days before cleaning. Clean with Glare Buster Glass Cleaner, and gently wipe with a dry clean cloth. Do not use excessive pressure.
Coating Removal:
To remove the coating, use a Razor Blade scrapper. The coating should only be removed once dry.
Tips:
Not recommended for use on computer monitors. Use in ventilated area. Be sure all areas surrounding the screen are taped well.
Coverage:
Each can contains enough product to cover approximately 1 – 36” screen or any combination of the same area.
